Stainless Steel Pipes Manufacturer In UAE

Stainless Inox is one of the leading Supplier, Exporter and Stockholders of Stainless Steel Pipes & Tubes in Dubai, UAE that is being made up from High Quality of Standard Raw Materials.

We have in store for our clients a sturdy range of Stainless Steel Grade like 201,202, 304, 304L, 304H, 304LN, 309, 309S, 309H, 310S, 310H, 316, 316L, 316H, 316LN, 317, 317L, 321, 321H, 347, 347H, 348, 348H etc. that are capacitated to withstand temperature variations and thus are used in heat transfer process equipment like boilers, super heaters, heat exchangers, condensers and similar applications.

Designed as per national and international standards, these Stainless Steel Pipes are extremely long-lasting and can fit in to any length with no trouble due to the accessibility of different sizes and shapes. These SS Pipes are strictly checked on different quality parameters assuring their flawlessness at user’s end.

Stainless Steel Seamless Pipes

Stainless Steel Seamless Tubes

Stainless Steel ERW Pipes & Tubes

Stainless Steel Pipes & Tubes Specification :

Standard	:	ASTM A/ASME SA213/A249/A269/A312/A358/A554/A688
Grade	:	Gr. TP 201,202, 304, 304L, 304H, 304LN, 309, 309S, 309H, 310S, 310H, 316, 316L, 316H, 316LN, 317, 317L, 321, 321H, 347, 347H, 348, 348H etc.
Size	:	1/8”NB to 8”NB
Outer Diameter	:	6.35 mm O.D to 114.3 mm O.D
Length	:	up to 12 Meters
Thickness	:	0.8 mm to 12.7 mm
Form	:	Round, Square, Rectangular, Hydraulic Etc.

Chemical Composition of Stainless Steel Pipes

The table below shows the chemical composition for stainless steel pipe under ASTM A312. Differences in chromium, nickel and molybdenum content in each grade determine their corrosion resistance and suitability for particular service conditions.

Grade	C (max)	Si (max)	Mn (max)	P (max)	S (max)	Cr	Ni	Mo	Ti
TP304 / 1.4301	0.08	1	2	0.045	0.03	18.0–20.0	8.0–10.5	-	-
TP304L / 1.4307	0.035	1	2	0.045	0.03	18.0–20.0	8.0–12.0	-	-
TP304H / 1.4948	0.04–0.10	1	2	0.045	0.03	18.0–20.0	8.0–12.0	-	-
TP316 / 1.4401	0.08	1	2	0.045	0.03	16.0–18.0	11.0–14.0	2.0–3.0	-
TP316L / 1.4404	0.035	1	2	0.045	0.03	16.0–18.0	10.0–14.0	2.0–3.0	-
TP316Ti / 1.4571	0.08	1	2	0.045	0.03	16.0–18.0	10.0–14.0	2.0–3.0	0.7 > 5×(C+N)
TP321 / 1.4541	0.08	1	2	0.045	0.03	17.0–19.0	9.0–12.0	-	0.7 > 5×(C+N)
TP317L / 1.4449	0.08	1	2	0.045	0.03	18.0–20.0	11.0–14.0	3.0–4.0	-
TP347H / 1.4912	0.04–0.10	1	2	0.045	0.03	17.0–19.0	9.0–13.0	-	-
TP309S / 1.4833	0.08	1	2	0.045	0.03	22.0–24.0	12.0–15.0	0.75	-
TP310S / 1.4845	0.08	1	2	0.045	0.03	24.0–26.0	19.0–22.0	0.75	-

Grades such as TP316 and TP316L contain molybdenum, which gives better corrosion resistance in chloride-rich environments (like seawater) than TP304. Grades TP321 and TP316Ti contain titanium, which helps stabilise the steel and prevents sensitisation during welding (reducing the risk of weld corrosion). Grades with higher chromium, such as TP309S and TP310S, are chosen mainly for high‑temperature service, where oxidation resistance at elevated temperatures is the key requirement.

Trusted Stainless Steel Pipes Manufacturer In UAE

Types of Stainless Steel Pipes and Tubes

Stainless steel pipes and tubes are available in several forms, each suited to different pressure ratings, applications, and fabrication requirements. The main types are listed below.

Seamless Stainless Steel Pipes
Produced without a weld seam, these pipes offer uniform strength throughout. Used in high-pressure and high-temperature applications where structural integrity across the pipe wall is critical.

Welded Stainless Steel Pipes
Formed by rolling a strip of stainless steel and welding it along the length. These pipes suit low to moderate pressure duties and are typically more economical than seamless pipes in larger diameters.

ERW Pipes (Electric Resistance Welded)
These pipes are joined using electrical resistance heating instead of filler metal. This creates a uniform weld seam and enables more precise control of dimensions than other welding techniques.

Stainless Steel Square and Rectangular Tubes
Used in structural applications, fabrication, and support frameworks. Available in a range of wall thicknesses and grades depending on load and environmental exposure requirements.

Stainless Steel Instrumentation Tubes
These tubes have a precise outer diameter and wall thickness. They are used in instrumentation, hydraulic lines, and control systems where exact size and smooth surfaces are required.

The product range includes hollow sections, capillary tubing, and custom-shaped tubes manufactured to client requirements in grades such as 304, 316L, 321, and 347.